PeakTech 2710 - Testeur Numérique pour Disjoncteurs Différentiels (DDR) de type A et AC
Testeur Numérique pour Disjoncteurs Différentiels (DDR) de type A et AC
Les disjoncteurs différentiels (DDR) sont utilisés pour la protection individuelle et coupent un circuit lorsqu'un courant de défaut est détecté circulant à travers la terre de protection (PE). Ce testeur de DDR détermine le courant de déclenchement et le temps de déclenchement des DDR utilisés dans chaque nouveau bâtiment conformément aux réglementations de construction en vigueur.
La possibilité de sélectionner le courant de test et les caractéristiques du DDR permet une utilisation flexible de cet instrument.
Le testeur de DDR fait circuler un courant de défaut variable et vérifie à quelle valeur le DDR réagit et avec quel temps d'intervention.
Digital Residual Current Devices Tester, RCD Types A, AC
Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations.
The various selectable test currents and characteristics of the RCD allow flexible use of this instrument.
RCD testers allow a fault current to flow and determine at which fault current the RCD reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated switch.
- 3-digit LCD display with backlight
- Normal (N) or Selective (S) type RCD test
- Applicable measurement standards: IEC 61557-6, NF EN 61557-6, VDE 0413-6
- Safety: EN-61010-1; CAT III 600 V, IP40, double insulated housing
- Accessories: carrying case, test leads, batteries, user manual
Nominal test current | 10 / 30 / 100 / 500 / 1000 mA |
Current selection | 0.5x, 1x, 2x, 5x nominal current |
Trip time | 10-2000 ms at 0.5x, 10-500 ms at 1x, 10-150 ms at 2x, 10-40 ms at 5x |
Ramp test | 0.4 x to 1.4 times nominal rated current |
RCD Types | Type-A, Type-AC |
Operation voltage | 6 x 1,5 V AA (UM-3) batteries |
Dimensions (WxHxD) | 92 x 200 x 50 mm3 |
Weight | 700 g |
3 otros productos en la misma categoría: