PeakTech 2710 - Comprobador Digital para Interruptores Diferenciales (RCD) tipo A y AC
Comprobador Digital para Interruptores Diferenciales (RCD) tipo A y AC
Los interruptores diferenciales (RCD) se utilizan para protección personal y apagan un circuito cuando se detecta una corriente de falla que fluye a través de la tierra de protección (PE). Este comprobador de RCD determina la corriente de disparo y el tiempo de disparo de los RCD utilizados en cada nuevo edificio de acuerdo con las normativas de construcción vigentes.
La posibilidad de seleccionar la corriente de prueba y las características del RCD permite un uso flexible de este instrumento.
El tester RCD hace circular una corriente de falla variable y verifica a qué valor reacciona el RCD y con qué tiempo de intervención.
Digital Residual Current Devices Tester, RCD Types A, AC
Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations.
The various selectable test currents and characteristics of the RCD allow flexible use of this instrument.
RCD testers allow a fault current to flow and determine at which fault current the RCD reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated switch.
- 3-digit LCD display with backlight
- Normal (N) or Selective (S) type RCD test
- Applicable measurement standards: IEC 61557-6, NF EN 61557-6, VDE 0413-6
- Safety: EN-61010-1; CAT III 600 V, IP40, double insulated housing
- Accessories: carrying case, test leads, batteries, user manual
Nominal test current | 10 / 30 / 100 / 500 / 1000 mA |
Current selection | 0.5x, 1x, 2x, 5x nominal current |
Trip time | 10-2000 ms at 0.5x, 10-500 ms at 1x, 10-150 ms at 2x, 10-40 ms at 5x |
Ramp test | 0.4 x to 1.4 times nominal rated current |
RCD Types | Type-A, Type-AC |
Operation voltage | 6 x 1,5 V AA (UM-3) batteries |
Dimensions (WxHxD) | 92 x 200 x 50 mm3 |
Weight | 700 g |
3 otros productos en la misma categoría: