PeakTech 1195 - Oscilloscope Numérique 100MHz avec 2 Canaux, Multimètre Numérique
1195
1 092,26 $US
Oscilloscope Numérique 100MHz avec 2 Canaux, Multimètre Numérique
Cette combinaison d'un oscilloscope numérique à 2 canaux 100MHz et d'un multimètre numérique vraie valeur effective (TRMS) est une solution complète pour les besoins de mesure.
La présence de touches de fonction rapides simplifie toutes les opérations. L'écran couleur haute résolution de 3,8 pouces avec panneau TFT (640 x 480 pixels - 65535 couleurs) affiche clairement les formes d'onde.
La longue durée de vie de la batterie Lithium-ion garantit un fonctionnement continu.
Protocole HTTPS de sécurité
Expédition rapide dans le monde entier
A votre service 365 jours par an
100MHz 2 Channels Digital Storage Oscilloscope, Digital Multimeter
This combination of 2 Channels 100MHz digital storage oscilloscope and True RMS multimeter makes a complete solution for measurement needs.
The creative design for short cut keys simplify all the operation and the high resolution 3.8 inch color display with TFT panel (640 x 480 pixels - 65535 colors) help to observe the waveforms, whereas the long time operating lithium-ion battery guarantees the continuous work.
This instrument is the ideal equipment for modern on site measurements.
- USB interface
- Socket for USB stick to save data
- Support alternative trigger
- Advantage of video trigger function and optimized trigger sensitivity
- Record length 6K
- True RMS multimeter
- Dual independet galvanic separated (for multimeter and between oscilloscope and multimeter)
- Auto scale and auto setup function in oscilloscope mode
- 5 V 1 kHz output for adjusting the oscilloscope probes
- Safety: EN 61010-1: CAT II 400 V
- Accessories: AC-DC adaptor, 2 oscilloscope probes, test leads, cable for connection to USB mass storage, extension module for small capacity measurement, USB interface cable, software on CD for Windows 2000/XP and VISTA, carrying case, manual
- Optional accessories: accu pack 7.4 V, 3.5 Ah, model AKKU 5
| Oscilloscope | |
|---|---|
| Bandwidth | 100 MHz |
| Channels | 2 |
| Display | 3.8” TFT colour display (640 x 480 pixel - 65535 colours) |
| Acquisition | |
| Mode | sample, peak detect, averaging |
| Sample rate (real time) | 250 MS/s |
| Input | |
| Input coupling | DC, AC |
| Input impedance | 1 MΩ ± 2 % parallel with 20 pF ± 5 pF |
| Probe attenuation factors | 1X, 10X, 100X, 1000X |
| Max. input voltage | 400 V (pk-pk) CAT II |
| Horizontal system | |
| Sampling range | 10 S/s ~ 500 MS/s |
| Time base range | 5 ns / div ~ 5 s / div (in 1 / 2.5 / 5 steps) |
| Accuracy | 100 ppm |
| Vertical system | |
| Verticale resolution | 8 Bits |
| Verticale sensitivity | 5 mV / div. ~ 5 V / div. (BNC input) |
| Rising time | < 3.5 ns |
| DC gain accuracy | ± 5 % |
| Trigger | |
| Trigger type | Edge, Video |
| Trigger mode (Edge) | Auto, Normal, Single, Trigger Hold off |
| Trigger sensitivity | DC, AC |
| Trigger Sync. (Video) | Field, Line |
| Trigger sensitivity (Video) | 2 Div (peak-peak) |
| Line / Field frequency (Video) | support NTSC, PAL, SECAM |
| Measurement | |
| Autom. measurement | PK-PK, averaging, RMS, frequency, cycle, Vtop,Vmax,Vmin,Vbase,Vamp, overshoot, preshoot, Rise Time, Fall Time, +Widht, -Width, +Duty, -Duty, Delay a > b (wave up and down) |
| Waveform storage | 4 waveforms, 4 settings |
| Digital Multimeter | |
| Voltage | DC V: 400 mV / 4 / 40 / 400 V; ± (1 % + 1 digit) AC V: 4 / 40 / 400 V; ± (1 % + 3 digits) (40 ~ 400 Hz) |
| Current | DC A: 40 / 400 mA / 10 A; ± (1.5 % + 1 digit) AC A: 40 / 400 mA / 10 A; ± (1.5 % + 3 digits) |
| Resistance | 400 Ω / 4 / 40 / 400 kΩ / 4 / 40 MΩ; ± (1 % + 3 digits) |
| Capacity | 51.2 nF ~ 100 µF; ± (3 % + 3 digits) |
| Operating voltage | 7.4 V / 3500 mA DC Li-Ion-Accumulator or AC Adaptor 230 V AC; 50 Hz, 8.5 V DC / 1.5 A |
| Dimensions (WxHxD) | 115 x 180 x 40 mm3 |
| Weight | 650 g |
Vous aimerez aussi
6 altri prodotti nella stessa categoria:
