PeakTech 1220 - Oscilloscope Numérique 20MHz avec 1 Canal, Multimètre Numérique
1220
378,73 $US
Oscilloscope Numérique 20MHz avec 1 Canal, Multimètre Numérique
Cette combinaison d'un oscilloscope numérique à 1 canal 20MHz et d'un multimètre numérique vraie valeur effective (TRMS) est une solution complète pour les besoins de mesure.
La présence de touches de fonction rapides simplifie toutes les opérations. L'écran couleur haute résolution de 3,8 pouces avec panneau TFT (640x480 pixels - 65535 couleurs) affiche clairement les formes d'onde.
La longue durée de vie de la batterie Lithium-ion garantit un fonctionnement continu.
Protocole HTTPS de sécurité
Expédition rapide dans le monde entier
A votre service 365 jours par an
20MHz 1 CH Digital Storage Oscilloscope, Digital Multimeter
This combination of digital storage oscilloscope with True RMS multimeter making a complete solution for measurement need. The creative design for short cut keys simplify all the operation and the high resolution 3,8 inch color display with TFT-LCD panel help to observe the waveform work, whereas the long time operation li-ion battery guarantee the continuous work. This instrument is ideal equipment for modern measurement world and on-site measurement.
- USB interface
- socket for USB-stick to save data portable
- support alternative trigger
- advantage video trigger function and optimize trigger sensitivity
- record length 6K
- true RMS multimeter
- dual independet galvanic separated (for multimeter and between oscilloscope and multimeter)
- auto-scale and auto-setup function in oscilloscope mode
- Safety: EN 61010-1; CAT II 400V
- Accessories: AC-DC-adaptor, 2 pcs. oscilloscope probes, test-leads, cable for connection to USB mass storage, extension module for small capacitance measurement, USB-interface cable, software-CD for Windows 2000/XP and VISTA, carrying case and manual
| Bandwidth | 20MHz |
| CH | 1 |
| Display | 3.8” TFT color display 320x240 – 65535 colors |
Acquisition | |
|---|---|
| Mode | sample, peak detect, averaging |
| sample rate (real time) | 100MS/s |
Input | |
| Input coupling | DC, AC, GND |
| Input impedance | 1MΩ ± 2% parallel with 20pF ± 5pF |
| Probe attenuation factors | 1X, 10X, 100X, 1000X |
| Max. input voltage | 400V (pk-pk) CAT II |
Horizontal system | |
| Sampling range | 10S/s ~ 100MS/s |
| Time base range | 5ns/div ~ 100s/div (in 1 / 2.5 / 5 steps) |
| Accuracy | 100 ppm |
Vertical system | |
| Vertical resolution | 8 Bits |
| Vertical sensitivity | 5mV/div. ~ 5V/div. (BNC input) |
| Rising time | < 17.5ns |
| DC gain accuracy | ± 3% |
Trigger | |
| Trigger type | Edge, Video |
| Trigger mode (Edge) | Auto, Normal, Single, Trigger Hold off |
| Trigger sensitivity | DC, AC |
| Trigger-Sync (Video) | Field, Line |
| Trigger sensitivity (Video) | 2 Div (peak-peak) |
| Line / Field frequency (Video) | support NTSC, PAL, SECAM |
Measurements | |
| Automatic measurements | PK-PK, averaging, RMS, frequency, cycle, Vtop,Vmax,Vmin,Vbase,Vamp, overshoot, preshoot, Rise Time, Fall Time, + Widht, -Width, +Duty, -Duty, Delay a > b (wave up and down) |
| waveform storage | 4 waveforms, 4 settings |
Digital-Multimeter | |
| Voltage | DC: 400mV / 4 / 40 / 400V; ± (1% + 1 digit) AC: 4 / 40 / 400V; ± (1% + 3 digits) (40 ~ 400Hz) |
| Current | DC: 40 / 400mA / 10A; ± (1.5% + 1 digit) AC: 40 / 400mA / 10A; ± (1.5% + 3 digits) |
| Resistance | 400Ω / 4 / 40 / 400kΩ / 4 / 40MΩ; ± (1% + 1 digit) |
| Capacity | 51.2nF ~ 100µF; ± (3% + 3 digits) |
| Operating voltage | 7.4V / 3500mAh DC Li-Ion-Accumulator or AC-Adaptor 230V AC; 50Hz, 8.5V DC / 1.5A |
| Dimensions (WxHxD) | 115x180x40mm3 |
| Weight | 650g |
Vous aimerez aussi
6 other products in the same category:
