PeakTech 6181 - Bloc d'Alimentation de Laboratoire, CC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232
Bloc d'Alimentation de Laboratoire, CC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232
Le bloc d'alimentation innovante PeakTech 6181 avec écran couleur TFT combine les avantages d'une bloc d'alimentation de laboratoire linéaire avec des options de contrôle à distance, qui ont été principalement réservées jusqu'à présent pour alimentations à découpage.
Il est géré par le système de menus graphiques et permet un contrôle et une programmation simples de ses nombreuses fonctions.
En outre, l'appareil utilise le logiciel PC inclus qui permet un contrôle à distance complet.
Pour doubler la tension de sortie ou le courant de sortie, les deux canaux indépendants peuvent être interconnectés en série ou en parallèle.
Il est également possible d'avoir une sortie positive et l'autre négative.
Laboratory Power Supply, DC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232
The innovative PeakTech 6181 power supply unit with color TFT display combines the advantages of a linear-controlled laboratory power supply unit with the remote control options, which have mostly been reserved by switching power supplies so far.
It is operated via the graphical menu system and enables simple control and programming of its multiple features.
In addition, the device is using the included PC software that allows a complete remote control.
For doubling the output voltage or output current values, the two independent channels can be interconnected in serial or parallel circuit. Also a plus/minus connection of the outputs is possible.
The technique used by this device and the multiple functions integrated are ideal for the use in research and development in HF-sensitive components and PCBs.
- 10 cm (3.9 ") TFT color display
- Graphical User Menu
- Two independent channels with 0 to 30 V / 0 to 6 A DC
- With additional output 0 to 6 V / 0 to 3 A DC
- High output resolution of 1 mV and 1 mA
- Low Ripple & Noise
- Over Voltage and Over Current protection
- Current, Voltage and Power display
- Up to 100 programmable output steps with configurable timer
- Time programs selectable as loop or cycle
- Included PC software for remote control
- Outputs Serial, Parallel, or plus/minus interconnected
- Record of Output values to USB-Storage
- LAN, RS-232, USB host and USB Device interface
- Accessories: Power cable, USB interface cable, software for Windows, Manual
POWER SUPPLY SPECIFICATIONS | |
---|---|
Output Voltage (CH1, CH2) | 2 x 0 - 30 V |
Output Current (CH1, CH2) | 2 x 0 - 6 A |
Channel CH3 | 1 x 0 - 6 V @ 0 - 3 A |
Output power | 2 x 180 + 1 x 18 W |
Residual Ripple V | ≤ 0.01% + 3 mV |
Residual Ripple I | ≤ 0.01% + 3 mA |
Set Resolution V | 1 mV |
Set Resolution I | 1 mA |
Accuracy V | ≤ 0.03 % + 10 mV |
Accuracy I | ≤ 0.1 % + 8 mA |
Read Back Resolution V | 1 mV (< 10 V) ; 10 mV (> 10 V) |
Read Back Resolution I | 1 mA |
Read Back Accuracy V | ≤ 0.03 % + 10 digits |
Read Back Accuracy I | ≤ 0.1 % + 8 digits |
DISPLAY SPECIFICATIONS | |
Display Size | 10 cm (3.9”) TFT-Display |
Display Resolution | 480 x 320 Pixels |
Display Colors | 65536 Colors |
GENERAL SPECIFICATIONS | |
Interfaces | LAN, USB host, USB device, RS-232 |
Operating Voltage | 220 V AC (± 10%), 50 Hz |
Cooling | Fan Cooling (load dependent) |
Dimensions (WxHxD) | 250 x 160 x 360 mm3 |
Weight | 12 kg |
10 other products in the same category: