Cart (empty) 0

PeakTech 610 - Logic Probe 20 MHz

610
$33.11

Logic Probe, 20 MHz

The Logic Probe is ideal for troubleshooting and analysis of logic circuits. It works as a level detector, a pulse detector, a pulse stretcher and a pulse memory.
It can be used directly to inject a signal into the logic circuits without removing the IC or breaking the circuits.
The 100 mA pulse output insures that the device under test will be pulsed, while the short 10 μs duration of the output pulse makes sure that no damage will be done to the circuit under test.
The Logic Pulser output is switchable between 0.5 and 400 Hz, making it suitable for use with either a logic probe or with an oscilloscope.

Available
Security HTTPS protocol
Fast shipment worldwide
At your service 365 days a year

Logic Probe, 20 MHz

The Logic Probe is ideal for troubleshooting and analysis of logic circuits. It works as a level detector, a pulse detector, a pulse stretcher and a pulse memory.
It can be used directly to inject a signal into the logic circuits without removing the IC or breaking the circuits.
The 100 mA pulse output insures that the device under test will be pulsed, while the short 10 μs duration of the output pulse makes sure that no damage will be done to the circuit under test.
The Logic Pulser output is switchable between 0.5 and 400 Hz, making it suitable for use with either a logic probe or with an oscilloscope.

Input frequency 20 MHz
Input impedance 1 MΩ
TTL 1 High; 0 Low > 2.3; < 0.8 V ± 0.2 V
CMOS 1 High; 0 Low > 70 % Vcc; < 30 % Vcc ± 10 %
Minimum pulse width 30 ns
Operating Voltage 4 - 18 V DC
Dimensions (WxHxD)   18 x 210 x 18 mm3
Weight 45 g

Download

Manual

PeakTech_610_04_2016.pdf

Download (189.58k)