Cables-Voltage-Phase Testers

Voltage Detector 50 - 1000 V AC non Contact, with Buzzer Easy to use, for non-contact detection of AC voltage from 90 V to 1000 V. Suitable for outlets or for wire insulation testing. Suitable for conductor tracking of flush-mounted cables and localisation of line interruptions. If AC-voltage is at the measuring point, it is visually indicated by a flashing red LED and the integrated buzzer sounds. The probe lights green when the measuring point is free of voltage.

Voltage Detector 50 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight Voltage Detector for the contactless detection of AC voltages on live cables and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 50V AC. When the display shows "Working" you can be sure that the detector is working and detects if there is voltage. The voltage detection is indicated by the flashing of the yellow or red LED, by the sound of the buzzer and the vibration of the detector. The voltage detection cannot escape even in noisy environments. The integrated LED flashlight can be switched on at any time, even if the voltage detector is switched off. In addition, the device can be carried comfortably and safely with its pocket clip.

Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight Voltage Detector for the contactless detection of AC voltages on live cables and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 12V AC. When the display shows "Working" you can be sure that the detector is working and detects if there is voltage. The voltage detection is indicated by the flashing of the yellow or red LED, by the sound of the buzzer and the vibration of the detector. The voltage detection cannot escape even in noisy environments. The integrated LED flashlight can be switched on at any time, even if the voltage detector is switched off. In addition, the device can be carried comfortably and safely with its pocket clip.

Digital Multimeter, 3 ½ digits (1999) 12mm, Non-contact Voltage Detection, Automatic Fuse, LED-Flashlight An easy to use and safe Multimeter with integrated protection frames, pocket sized for AC/DC voltage, current and resistance measurements, and non-contact voltage detection, with built-in flashlight. This devices uses an self-resetting PTC fuse for it's mA measurement range.

Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper TÜV/GS-approved 2-pole voltage tester with LED-display for DC and AC measurement from 12 V to 690 V provides further a wide range of measurement functions. The highlights are the measuring point illumination, continuity test with visual and audible signal and the phase and direction indicator.

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...

3-Phase Rotation Tester with LED-Display Determines rotary field direction, non-contact rotary field indication and determines the motor connection. Compact and handheld combitester designed according to safety standard CAT III 300 V. In modern style, essential, ideal for use in power installation. Allows contactless determination of the turning direction of unconnected motors or motors in the off status as well as of rotating fields. Electronic 3-phase measurements and test of phase breakdowns.

3-Phase Rotation Tester with LCD-display New handheld tester designed according to safety standard CAT III 600 V in modern, compact style, for checking phase sequence and rotation. LCD-Displays provided on the unit will show wether the phase is open or which phase in open at a glance.

Scanning Device for Material Detection in a Wall The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls. The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits. The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.

AC/DC Voltage Tester with RCD Test and LCD Display 3 ½ digits TÜV/GS-approved 2-pole voltage tester with backlight LCD 3½ digits display and bargraph for AC and DC measurement from 6 V to 400 V AC, 690 V DC. It offers also the possibility of continuity test with visual and audible signal, phase and direction indicator, and the testing of residual current devices (RCD).

Transmitter for Electric Cables Detector PeakTech 3435 Additional transmitter to be used in conjunction with the cables detector PeakTech 3435 to allow simultaneous tracking of multiple conductors.

AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits PeakTech 1096 is a new instrument for measuring voltages accurately and quickly at the same time thanks to a 3 ½ digit backlit LCD display and a coarse LED indication of the usual voltage range. A single phase test and a direction of rotation display for 3-phase systems are already integrated in this model. The low impedance measurement function can be activated to avoid false indications due to capacitively induced voltages or to test RCDs. Furthermore, resistance measurement and continuity test are integrated, to be used only on voltage free conductors. When continuity is detected, the continuity check LED will illuminate and the beeper will sound. PeakTech 1096 has been tested by TÜV / GS for maximum user...

Electrical Cables Detector This new cable detector consisting of a transmitter and a receiver is suitable for the search of non-energized and live wires, as well as line breaks and line tracking of surface and flush mounted conductors, pipe systems and even conductors underground. Also power circuits can be localized in distribution panels and electric cabinets. By the adjustable channels up to 7 transmitters can be used simultaneously, which are displayed correctly with the receiver through the assigned channel number. The high sensitivity of the receiver allows the tracing of conductors from up to 2 meters distance. Well suited for complex electrical systems, pipe installations of heating systems for testing new installations and evaluate older systems in reconstruction works.

IR-Thermal Imaging Camera 60 x 60 pixels, with Micro-SD Card This IR camera has an unbeatable performance / price ratio and is particularly suitable for industry, construction, mechanical, thermo-hydraulic, electrical systems, and wherever it is useful to make small temperature differences visible. This IR camera also contains a built-in video camera in the visible spectrum that allows you to simultaneously obtain infrared and visible images, the overlap of which allows problems to be easily identified. IR and visible images can be saved, with time and date, on the supplied SD card for later processing on a PC. In addition, this unit offers five different color palettes for thermal imaging, five blend modes for photo to thermal imaging and a graphical menu navigation.

High performance IR camera for thermal imaging, 220 x 160 pixels, -20 ° C to +400 ° C Versatile thermal imaging camera with a resolution of 220x160 thermal pixels, which makes temperature differences easily recognizable. Particularly suitable for detecting thermal bridges, leaks in systems and pipes, for tracing heating pipes in walls and in floors, for finding bad electrical contacts and prevent the risk of fires due to overheating. Five different color palettes for thermography and five modes of overlaying the photo in the visible, allow the user to easily identify thermal anomalies. The analysis software is stored in the internal memory of the device and can be installed at any time on a connected PC.

Thermal Imaging Camera 160x120 pixels -20°C to 550°C with USB and Software The PeakTech 5615 is a thermal imaging camera with a resolution of 160x120 thermal image points and a high-quality sensor, which makes even the smallest temperature differences visible. All thermal images can be opened and evaluated using the enclosed software, with subsequent changes, e.g. can be done on the pallet selection. This new tool is particularly useful for finding thermal bridges in thermography, leaks in installations and piping systems, or for tracing heating pipes in walls and floors. In electrical systems, this thermal imaging camera allows you to quickly identify faulty contacts and therefore promptly prevent a risk of fire due to contact resistance.

Thermal Imager IR 120 x 120 pixels with Multimeter 3 5/6 digit (5999) 15mm, TRMS, Capacimeter, Frequencymeter, Thermometer K, Data Logger, Bluetooth 4.0 This new combination of state-of-the-art True RMS graphics multimeter and quick-reponse thermal imaging camera ensures the professional use in all areas of electrical engineering. You can check the heat development by electrical connections and loosening points, control cabinets or wiring of systems and reliably find faulty connections with high contact resistances. Use the extensive multimeter functions to make precise measurements that you can automatically log, save via screenshot or record and process via app for Android or iOS mobile devices.

Thermal Imaging Camera 384x288 pixels -20°C to 550°C with USB, WiFi, Bluetooth and Software The PeakTech 5620 thermal imaging camera offers clear thermal images with a resolution of 384 x 288 thermal points and a high frame rate of 25 Hz, which are particularly useful in video recording. Also offers a PIP (picture-in-picture) display, a real image camera or a fusion function in which the contours of the real image recording are combined with the thermal image in order to ensure an even better display. The functions are controlled via push buttons on the device, and via the touch screen function of the color TFT display and include video and audio recordings. The images can be opened and evaluated using the enclosed software, with subsequent changes, e.g. the pallet selection.