Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 30 products.

Sort by:

PeakTech 1206 - Tablet Oscilloscope, 70 MHz, 2 Channels, 1 GS/s with Multimeter 4½ digits (19999), LAN and USB Interfaces

Tablet Oscilloscope, 70 MHz, 2 Channels, 1 GS/s, Multimeter 4½ digits (19999), LAN and USB Interfaces The PeakTech 1206 is a new, innovative oscilloscope, based on the size and design of a standard tablet. Any measurement can be recorded as with a bench oscilloscope. It is a two-channel oscilloscope with a bandwidth of 70 MHz able to carry out various measurements with a sampling rate of up to 1 GS/s. The built-in multimeter makes it possible to significantly expand the area of application of the oscilloscope. Settings can be made quickly and precisely with the 8" touchscreen or with the function keys. PeakTech 1206 is a tablet oscilloscope that can be used in almost all areas of electronic engineering due to its portability and excellent performance.

$617.47

PeakTech 1205 - 20MHz 2 Channels Digital Storage Oscilloscope, Digital Multimeter

20MHz 2 Channels Digital Storage Oscilloscope, Digital Multimeter This combination of 2 Channels 20MHz digital storage oscilloscope and True RMS multimeter makes a complete solution for measurement needs. The creative design for short cut keys simplify all the operation and the high resolution 3.8 inch color display with TFT panel (640 x 480 pixels - 65535 colors) help to observe the waveforms, whereas the long time operating lithium-ion battery guarantees the continuous work. This instrument is the ideal equipment for modern on site measurements.

$650.03

PeakTech 2680A - High Voltage Insulation Tester 5,000 V DC, 1 TΩ

High Voltage Insulation Tester 5,000 V DC, 1 TΩ PeakTech 2680A is a high voltage insulation meter capable of generating a test voltage up to 5,000 V DC. Check the insulation of electrical lines or equipment and identify faulty ones. The measuring functions can be set quickly using the selector switch and the pushbuttons. Built into a sturdy carrying case which also protects it from splash water and external influences. With the new additional functions PI (Polarization Index) and DAR (Dielectric Absorption Ratio) the possible applications of the PeakTech 2680A are very wide. Due to its many functions the PeakTech 2680A is ideal for everyday use in electrical engineering as it can be used in almost every area in which insulation measurement is required.

$651.00

PeakTech 1245 - Digital Oscilloscope 8 bits, 8", 2 Channels 100 MHz 1 GS/s total

Digital Oscilloscope 8 bits, 8", 2 Channels 100 MHz 1 GS/s total Digital storage oscilloscope of the latest generation with high-resolution color display, backlight, high bandwith and high sampling rate, VGA-output, large internal memory, USB port and LAN connection for integration into networks. The amazing value for money and modern technology allow a wide range of applications in education, service and quality assurance area.

$660.88

PeakTech 1340 - Digital Oscilloscope 8 bits, 8", 4 Channels 60 MHz 1 GS/s total

Digital Oscilloscope 8 bits, 8", 4 Channels 60 MHz 1 GS/s total 4-channel digital oscilloscope with large 8" (20 cm) high resolution color TFT display, with LAN, USB Host and USB Device interfaces.

$660.88

PeakTech 5995 - Laboratory Power Supply, DC 0-30V 0-6A, AC 0-30V 6A, Digital Meters

Laboratory Power Supply, DC 0-30V 0-6A, AC 0-30V 6A, Digital Meters This high precision DC/AC power supply provides with two adjustable outputs of DC and AC. The DC voltage is stabilized and is adjustable from 0 to 30 V, the DC current limit is adjustable from 0 to 6 A. The AC voltage is adjustable from 0 to 30 V, the AC over-current LED indication is adjustable from 0 to 6 A. Both the blue colour 3 digits LCD volt and ampere meters guarantee the indication of each of the two output with high accuracy. Especially conceived for servicing of AC-circuits, transformers, illumination, etc.

$693.43

PeakTech 1330 - Digital Oscilloscope, 4 Channels, 100 MHz, 1 GSa/s total, PC based

Digital Oscilloscope, 4 Channels, 100 MHz, 1 GSa/s total, PC based This newly developed 4-channel PC Oscilloscope is ideal for mobile use on a laptop, for permanent installation in control cabinets, for industrial equipments and many other applications where a small, lightweight and powerful oscilloscope is required. The measurement data can be directly transferred to the PC via USB or LAN network with the included PC software. The oscilloscope has an insulated LAN network interface through which the data can be transmitted remotely in local area networks.This allows to install the device in electrical systems and allows you to do data acquisition comfortably from the workplace. The interface isolation ensures the maximum security for the user and the computer system.

$693.43

Out-of-Stock

Out of stock

PeakTech 6181 - Laboratory Power Supply, DC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232

Laboratory Power Supply, DC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232 The innovative PeakTech 6181 power supply unit with color TFT display combines the advantages of a linear-controlled laboratory power supply unit with the remote control options, which have mostly been reserved by switching power supplies so far. It is operated via the graphical menu system and enables simple control and programming of its multiple features. In addition, the device is using the included PC software that allows a complete remote control. For doubling the output voltage or output current values, the two independent channels can be interconnected in serial or parallel circuit. Also a plus/minus connection of the outputs is possible.

$716.77

PeakTech 1207 - Tablet Oscilloscope, 120 MHz, 2 Channels, 1 GS/s with Multimeter 4½ digits (19999), LAN and USB Interfaces

Tablet Oscilloscope, 120 MHz, 2 Channels, 1 GS/s, Multimeter 4½ digits (19999), LAN and USB Interfaces The PeakTech 1207 is a new, innovative oscilloscope, based on the size and design of a standard tablet. Any measurement can be recorded as with a bench oscilloscope. It is a two-channel oscilloscope with a bandwidth of 120 MHz able to carry out various measurements with a sampling rate of up to 1 GS/s. The built-in multimeter makes it possible to significantly expand the area of application of the oscilloscope. Settings can be made quickly and precisely with the 8" touchscreen or with the function keys. PeakTech 1207 is a tablet oscilloscope that can be used in almost all areas of electronic engineering due to its portability and excellent performance.

$725.99

PeakTech 4096 - Digital Graphic Benchtop Multimeter, 5 ½ digits (199999), TrueRMS, 4-wire Ohm, Datalogger, RS-232, LAN, USB

Digital Graphic Benchtop Multimeter, 5 ½ digits (199999) 480x320 pixel 10cm, TrueRMS, 4-Wire Ohm, Frequencymeter, Thermocouple or Resistance (RTD) Thermometer, Datalogger, RS-232, LAN, USB Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency. It takes up to 150 readings per second, measures the True Effective Value up to 100 kHz and provides many graphical representations and mathematical functions. It has RS-232 interfaces, for control via software or SCPI protocol, LAN and USB.

$758.55

PeakTech 4165 - DDS Arbitrary Waveform Generator, 1 µHz - 60 MHz, 2 Channels, 14 bits Vertical

DDS Arbitrary Waveform Generator, 1 µHz - 60 MHz, 2 Channels, 14 bits Vertical This newly designed direct digital synthesis (DDS) arbitrary waveform generator with advanced graphical user control has excellent technical properties and a high variety of functions. Of particular note here are the two equivalent output channels, the large number of pre-stored arbitrary waveforms and many different types of modulation. In this way, this device is perfectly suited for nearly all tasks in research, development and the training area.

$758.55

PeakTech 2280 - Electronic Load, DC 300W 360V 30A, USB

Electronic Load, DC 300W 360V 30A, USB This newly developed electronic load with PC interface can be used in important testing procedures for quality assurance as well as e.g. the examination of power and control equipment, batteries, fuel cells and solar cells. For precise load control for the various applications, this device provides Constant Voltage (CV), Constant Current (CC), a Constant Resistance (CR) or a Constant Power (CP) as load control modes with a highly accurate resolution of 1 mW, 1 mV, 1 mΩ and 1 mA. In additon, the device has several automated test modes, for example a battery test or the dynamic test. The PC interface and the Software allow freely programmable test sequences to be implemented.

$758.55

PeakTech 4115 - DDS Arbitrary Waveform Generator, 1 µHz - 60 MHz, 2 Channels, 14 bits Vertical

DDS Arbitrary Waveform Generator, 1 µHz - 60 MHz, 2 Channels, 14 bits Vertical This newly developed high-quality direct digital synthesis (DDS) arbitrary waveform generator has excellent technical properties and a high variety of functions. Of particular note here are the two equivalent output channels, the large number of pre-stored arbitrary waveforms and many different types of modulation. In this way, this device is perfectly suited for nearly all tasks in research, development and the training area.

$758.55

PeakTech 3450A - Thermal Imager IR 120 x 120 pixels with Multimeter 3 5/6 digit (5999) 15mm, TRMS, Data Logger, Bluetooth 4.0

Thermal Imager IR 120 x 120 pixels with Multimeter 3 5/6 digit (5999) 15mm, TRMS, Capacimeter, Frequencymeter, Thermometer K, Data Logger, Bluetooth 4.0 This new combination of state-of-the-art True RMS graphics multimeter and quick-reponse thermal imaging camera ensures the professional use in all areas of electrical engineering. You can check the heat development by electrical connections and loosening points, control cabinets or wiring of systems and reliably find faulty connections with high contact resistances. Use the extensive multimeter functions to make precise measurements that you can automatically log, save via screenshot or record and process via app for Android or iOS mobile devices.

$759.09

PeakTech 1355 - Digital Oscilloscope 12 bits, Touchscreen 8", 2 Channels 60 MHz 1 GS/s total, Multimeter 3 ¾ digits

Digital Oscilloscope 12 bits, Touchscreen 8", 2 Channels 60 MHz 1 GS/s total, Integrated Multimeter 3 ¾ digits Oscilloscope with touch screen, with 2 channels at high vertical resolution of 12 bits and large 8" TFT color display. Integrated multimeter 3 ¾ digits. LAN, USB Host and USB Device interfaces for the transmission of measured data to a PC or for remote control. VGA interface for external monitor.

$769.40

PeakTech 1310 - Digital Oscilloscope 8 bits, 8", 2 Channels 125 MHz 1 GSa/s total

Digital Oscilloscope 8 bits, 8", 2 Channels 125 MHz 1 GSa/s total Digital storage oscilloscope of the latest generation with high-resolution color display, backlight, high bandwith and high sampling rate, VGA-output, large internal memory, USB port and LAN connection for integration into networks. The amazing value for money and modern technology allow a wide range of applications in education, service and quality assurance area.

$791.10

Available on order

PeakTech 2685A - High Voltage Insulation Tester 10,000 V DC, 2 TΩ

High Voltage Insulation Tester 10,000 V DC, 2 TΩ PeakTech 2685A is a high voltage insulation meter capable of generating a test voltage up to 10,000 V DC. Check the insulation of electrical lines or equipment and identify faulty ones. The measuring functions can be set quickly using the selector switch and the pushbuttons. Built into a sturdy carrying case which also protects it from splash water and external influences. With the new additional functions PI (Polarization Index) and DAR (Dielectric Absorption Ratio) the possible applications of the PeakTech 2685A are very wide. Due to its many functions the PeakTech 2685A is ideal for everyday use in electrical engineering as it can be used in almost every area in which insulation measurement is required.

$792.08

PeakTech 1341 - Digital Oscilloscope 8 bits, 8", 4 Channels 100 MHz 1 GS/s total

Digital Oscilloscope 8 bits, 8", 4 Channels 100 MHz 1 GS/s total 4-channel digital oscilloscope with large 8" (20 cm) high resolution color TFT display, with LAN, USB Host and USB Device interfaces.

$823.66

PeakTech 1211 - Tablet Oscilloscope, 70 MHz, 4 Channels, 1 GS/s with Multimeter 4½ digits (19999), LAN and USB Interfaces

Tablet Oscilloscope, 70 MHz, 4 Channels, 1 GS/s, Multimeter 4½ digits (19999), LAN and USB Interfaces The PeakTech 1211 is a new, innovative oscilloscope, based on the size and design of a standard tablet. Any measurement can be recorded as with a bench oscilloscope. It is a four-channel oscilloscope with a bandwidth of 70 MHz able to carry out various measurements with a sampling rate of up to 1 GS/s. The built-in multimeter makes it possible to significantly expand the area of application of the oscilloscope. Settings can be made quickly and precisely with the 8" touchscreen or with the function keys. PeakTech 1211 is a tablet oscilloscope that can be used in almost all areas of electronic engineering due to its portability and excellent performance.

$845.36

PeakTech 6060 - Laboratory Power Supply, DC 2 x 0-30V 0-10A, 5V 3A, Digital Meters

Laboratory Power Supply, DC 2 x 0-30V 0-10A, 5V 3A, Digital Meters, Rack 19" 3U A new conception of power supply for built-in into 19” racks, are ideal for service centers, schools and industries. 3 digit 14 mm green LED-displays enable the user to read the fixed values quickly and accurately. 4 mm safety jacks and as well as 19” metal cabinet are main features of this new power supply. The unit provides 2 adjustable outputs for constant voltage and current, which can be connected in parallel or in series. That means max. output voltage 60 V DC in series or max. output current 20 A in parallel.

$867.06

Showing 1-20 of 30 item(s)